- Can you plug a condenser mic into an amp?
- What are condenser mics good for?
- What do you plug a condenser mic into?
- Why do condenser mics need phantom power?
- What type of microphone needs phantom power?
- Can a condenser mic be used live?
- When would you use a condenser microphone?
- Can you run a microphone through a guitar pedal?
- Does phantom power only work with XLR?
- Do I turn on phantom power first?
- How do you get phantom power on a mic?
- What type of microphone is best for singing?
- What is a phantom power adapter?
- Are condenser mics better than dynamic?
- How much power does a condenser mic need?
- Can I put microphone in AUX input?
- What happens if you put phantom power on a dynamic mic?
- Will a condenser mic work without phantom power?
- Is a condenser mic better for vocals?
Can you plug a condenser mic into an amp?
Condenser mics are also meant to be powered by 48v where an amps output is based on watts.
You would need to use a small sound board, an audio interface with mic preamps or an outboard preamp if you already have an interface with line inputs.
Can I plug a microphone into a guitar amp?.
What are condenser mics good for?
Condenser microphones are more expensive than dynamic microphones but are more suitable for capturing the sounds of acoustic instruments and vocals due to their high sensitivity. They should be avoided when dealing with high sound pressures, such as that created from a kick drum.
What do you plug a condenser mic into?
The Three Basic Options to Power a Condenser Microphone If recording to a computer primarily, phantom power (the power needed for a condenser mic) can be supplied from an audio interface. Once you buy one, the only thing you will need to do is to connect it with an XLR cable to your condenser microphone.
Why do condenser mics need phantom power?
The thing is, for a capacitor to work, it needs an outside energy source, such as a battery. Therefore, for your condenser microphone to work, it needs what is known as “phantom power.” This is unique to condenser microphones, as no other microphone requires phantom power.
What type of microphone needs phantom power?
It’s most widely used as a power source for condenser microphones, which have active electronics. In addition, true condenser microphones (as opposed to electret) require a voltage for polarizing the microphone’s transducer element, and phantom power provides a voltage for both of these purposes.
Can a condenser mic be used live?
Condenser microphones are most often found in recording studios. However, many condenser mics are now being used in live sound environments. The condenser microphone is a very simple mechanical system, simply a thin, stretched conductive diaphragm held close to a metal disk called the back plate.
When would you use a condenser microphone?
It’s always better to cut than boost, and recording “too much” highs is usually a good thing when recording sound effects. Given the condenser’s propensity for creating punchy sounds as well, a condenser is your go-to mic for recording sound effects. 3. They’re the Only Choice for a Shotgun Mic.
Can you run a microphone through a guitar pedal?
Guitar pedals usually run at a high impedance instrument level. You would need a pre-amp and a few converters to get a microphone working correctly thru it. Not very hard to do, and it’s definitely been done. … Then most likely out of the guitar pedals into a DI box and into another mic-pre on the console.
Does phantom power only work with XLR?
* Phantom power is typically supplied only by a mixer with an XLR input. If the mic requires phantom to operate and not phantom is present at the mixer input, the microphone will not produce a signal. … In general, mixers that only have 1/4″ phone jack inputs are not of professional quality.
Do I turn on phantom power first?
yes, always (imo) preferable to plug in (and disconnect) phantom powered mics when the mic pre providing phantom power is turned off.
How do you get phantom power on a mic?
Phantom power sends the correct power (+48V) to a condenser microphone via an XLR socket and cable. Plug in your condenser microphone, and switch on phantom power on the correct channel, and bingo- your microphone will spring to life.
What type of microphone is best for singing?
The 7 Best Microphones for Recording Vocals: under $700Shure SM58. For a long time now, the Shure SM58 has held the crown of “Most Popular Vocal Mic in the World“. … Rode NT1A. … Shure SM7B. … Sennheiser MD421. … Rode NTK. … sE Electronics sE2200a II. … Neumann TLM 102.
What is a phantom power adapter?
Phantom power, in the context of professional audio equipment, is DC electric power transmitted through microphone cables to operate microphones that contain active electronic circuitry. It is best known as a convenient power source for condenser microphones, though many active direct boxes also use it.
Are condenser mics better than dynamic?
The difference between a dynamic and a condenser microphone is a dynamic microphone is better for capturing loud, strong sounds (drums or loud vocals), particularly in a live setting, whereas a condenser microphone is used to capture more delicate sounds and higher frequencies (studio vocals for example), particularly …
How much power does a condenser mic need?
Condenser microphones require power for various parts of their operation, including impedance converters, preamplifier circuitry and, in some cases, to polarized microphone capsules. Phantom is usually a DC voltage ranging from 12 to 48 volts.
Can I put microphone in AUX input?
The Auxiliary input is designed for an amplified signal such as what is output from a smartphone headphone output. In order to use a microphone with the Aux input, it would need to be used with a microphone preamplifier before the signal gets to the Livemix Aux in.
What happens if you put phantom power on a dynamic mic?
If you are running live sound, you probably won’t notice much of a difference if you have phantom power switched on for a dynamic mic. … However, if there happens to be an imbalance in the amount phantom power voltage being applied to each pin, the power can damage or destroy a dynamic mic.
Will a condenser mic work without phantom power?
Although there’s no way to use a condenser mic without phantom power, you can use a condenser mic without an audio interface, or mixing board, straight to your computer. To do that you need you need an XLR to USB pre amp, such as the MXL Mic Mate Pro.
Is a condenser mic better for vocals?
Condenser microphones are best used to capture vocals and high frequencies. They are also the preferred type of microphone for most studio applications. … While condenser mics are great for capturing acoustic guitars, they don’t work well for big booming sounds.